The absorption refrigerator is basically a fridge which operates by using natural gas instead of electricity. If you use such a fridge in your kitchen you will be able to save a great deal of money on your monthly electricity bill. The absorption refrigerators are also very good for the environment. When using such a fridge you will enjoy the benefit of your surroundings being entirely free of toxic substances. While there are several benefits associated with the absorption refrigerator, you need to operate this device very carefully. You have to take particular care when lighting such a refrigerator. In order to light up a propane fridge, you need to carry out some vital steps.
Important Steps for Lighting the Propane Refrigerator
Locate the Electric Switch and Switch to the Propane Option
The first most important step which you have to carry out in order to light an absorption refrigerator is to locate the electric or the propane switch in your refrigerator. You will find this switch located in a panel at the top part of your refrigerator although in certain models you might find such a switch to be located right at the bottom of the fridge. The second essential step which you need to take in order to light an absorption refrigerator is to set this switch to the “propane” option. Such a switch could be one of the dial types of switches which you need to turn from a particular setting to another. It could also be a button which you need to push in order for you to activate the absorption refrigerator system.
Hold the Button Labeled as Push to Start and Press the Ignitor Button
The third essential step that you need to take for lighting up your absorption refrigerator is to push in and then hold the button which is labeled as “push to start”. You will find such a button located next to or near the electric or the propane switch. The final step that you need to take in order to light your propane refrigerator is to press the button that is entitled as “ignitor”, while holding the push to start button. You need to look into the prism or the viewing panel for flames. This viewing panel is likely to be located in the control panel. If you don’t get to view a flame then you should consider pressing over the ignitor button once again. If you get to see the flame then you should hold in the button that is entitled as “push to start” for a period of about thirty seconds. After that you have to release the “push to start” button. You have make sure that the flame burns. If the flame does not burn then you need to carry out the process all over again.
Thus, there are some really important steps which you need to take in order to light your absorption refrigerator. By carrying out these steps, you will be able to light up your absorption refrigerator quite successfully.